Camera Spacing Planner *ScopedLabs

Part of a Design Flow

This tool continues the Physical Security Design Flow

Use this step to convert usable single-camera footprint into practical camera-to-camera spacing along the protected perimeter. It turns effective coverage width into a real multi-camera layout before you validate continuity with Blind Spot Check.

This flow includes both Free and Pro tools. Unlock Pro to complete the full sequence.

Pro Tier

🔒 Locked

This tool is included with Pro access for the Physical Security category.

What this models

Raw versus usable coverage width per camera
Spacing required to maintain the overlap target
Estimated camera count along the protected run
Whether the layout is tight, balanced, or too wide before blind-spot validation

Back to Physical Security Unlock Pro for Physical Security

Calculator

Estimate how far cameras can be spaced while still honoring usable width and overlap target, so the final layout is based on practical continuity rather than raw lens footprint alone.

Perimeter Length (ft)

Distance to Target Plane (ft)

Horizontal FOV (deg)

Overlap Target (%)

Results

Enter valid values and press Calculate.

Model: raw width is calculated from horizontal field of view at the target plane, then reduced by the overlap target to estimate usable width. That usable width is applied across the total protected run to estimate camera count and actual spacing.

Back to Physical Security